I need something YOU may have.

Moderators: robnewyork, bassiclyLouDog, gameboy

By Quinc
#24136
Looking to put a 500watt motor on the Razor buggy and need a bracket to make things easier.

I need just the bracket:
Image
By Quinc
#24148
robnewyork wrote:that was 1000watt as i recall


Your right that is a little bigger then my 500watt unite. I fiddled with the 500watt motor for a few minutes and I don't see anyway of making it fit int he stock location. I am open to suggestions other then that mount though! =)
The original 250watt motor is tiny in comparison.
By robnewyork
#24168
Get a steel or aluminum L bracket bolt it to stock motor location.. Then drill it for the motor shaft and mounting bolts.. Just make it so the sprockets align perfectly when all bolted down.
By Quinc
#24170
robnewyork wrote:Get a steel or aluminum L bracket bolt it to stock motor location.. Then drill it for the motor shaft and mounting bolts.. Just make it so the sprockets align perfectly when all bolted down.


Good call! Looks like the bracket I am looking for cannot be bought separate from the motor anyway. Everything has got to be a project! lol
8mm (T8F) rear wheel sprocket

Looking for a >90T and <10 in. outside diam[…]