If you have a cheap supplier for motors, batteries, or anything that is of use for a scooter or E.V.
list it here for all to enjoy!

Moderators: robnewyork, bassiclyLouDog, gameboy

By OFFROADSCOOT
#27918
I'm helping a friend spec out an E300 build and came across this as a power solution. 2 in parallel will do 36v 8.8aH underdeck for a clean install. I'm not sure if 3 will fit underdeck. If they do then thats 36v 13.2aH. A little pricey – 3 would be $210 but he has more money than time right now. It even has quality XT60 connectors.




User avatar
By zen_racer
#27965
OFFROADSCOOT wrote:2 in parallel will do 36v 8.8aH underdeck for a clean install.
do these packs have onboard BMS, and will they function when wired up in parallel?

based on the specs i'm seeing, wondering also if these packs in parallel will handle the higher current draw from an overvolted Unite... this is for one pack found on ebay:

*Max. discharging current: 30amp
*Max Continuous Discharging Amperage: 20 Amps
*Rated Discharging Amperage: 15 Amps

if these are verified as non-issues then i think two packs would be the best bang for the buck, user friendly power source for 36v builds

those 16Ah multistars are an incredible deal but i dont think it'll work for 36v builds. 8s hot off the charger is 33.6v. LVC on a 36v yiyun is 31.5 +/- 0.5v so you'd have a very short run time running off 8s.
Re: Bladez 450S XTR s upgrade

always nice to come up w extra funding for project[…]